Lufft WS700 all-in-one compact weather station
The Lufft WS700 is ideal for measuring air temperature, relative humidity, solar irradiance, and air pressure. It is suitable for high-end applications where accuracy and build quality cannot be compromised.
The sensors are protected by a radiation shell for protection and to ensure measurement accuracy, making the WS700 compliant according to WMO guidelines.
The top-mounted precipitation tipping bucket rain gauge will accurately measure the precipitation quantity.
The WS700 is suitable for all climates, with a temperature range of -50 to +60 °C. There are no moving parts and data processing is built-in. This makes the WS700 incredibly robust and easy to use.
As standard, we supply the Lufft WS700 with Modbus communications. However, it is possible to supply the sensor with SDI-12. Please let us know at the time of ordering which you would prefer.
As with all WS series compact weather sensors, it is possible to fit a temperature probe. The probe measures surface temperature and is ideal for the PV solar sector to measure the back of panel temperature.
|Dimensions||Ø approx. 150 mm, height approx. 317 mm|
|Weight||Approx. 1.5 kg|
|Interface||RS485, 2 – wire, half – duplex|
|Power supply||11 to . 32 VDC|
|Power supply||5 to 11 VDC (electronics with limited precision of measurements)|
|Power supply||24 VDC +/- 10% (heater)|
|Power consumption||40 VA (heater)|
|Operating temperature||-50 to 60°C (with heater)|
|Operating rel. humidity||0 to 100% RH|
|Cable length||10 m|
|Protection level housing||IP66|
|Standards/Regulations||Compliant to IEC 61724-1:2017 Class C|
|Mast mounting suitable for||Mast diameter 60 – 76 mm|
|Measuring range||-50 to 60 °C|
|Accuracy||±0.2 °C (-20 to 50 °C), otherwise ±0.5 °C (>-30 °C)|
|Measuring range||0 to 100 % RH|
|Accuracy||±2 % RH|
|Measuring range||300 to 1200 hPa|
|Accuracy||±0.5 hPa (0 to 40 °C)|
|Measuring range||0 to 359.9 °|
|Accuracy||< 3 ° RMSE > 1.0 m/s|
|Measuring range||0 to 75 m/s|
|Accuracy||±0.3 m/s or ±3 % (0 to 35 m/s) ±5 % (>35 m/s) RMS|
|Droplet size||0,3 to 5 mm|
|Detection sensitivity||0,01 mm/h|
|Particle velocity||0.9 to 15.5 m/s|
|Precipitation types||rain/ snow|
|Solid precipitation||5.1 to ~30 mm|
|Intensity range||0 to 200mm/h|
|Intensity resolution||0.01 mm/h|
|Amount resolution||0.1 mm|
|Accuracy:||20 % under laboratory conditions|
|Reproducibility||Typical >90 % under laboratory conditions|
|Response time (95%)||< 1 s|
|Spectral range||300 to 1100 nm|
|Measuring range||1400 W/m²|
WS Series Frequently asked questions.
How do I mount my WS sensors?
The sensor can be mounted directly onto a 60mm diameter pole. The sensors come with ‘U’ mounting brackets. A mounting arm (which can attach to 40-80mm diameter poles) can be supplied too.
Are other communications protocols possible?
Possible interfaces are RS485 with supported protocols UMB-Binary, UMB-ASCII, Modbus-RTU, Modbus-ASCII, XDR, and SDI-12.
What data logger is the WS700 compatible with?
The WS700 is compatible with many commercially available Met/HydroMet dataloggers and PLS systems thanks to an open communication protocol.
- External temperature probe (can be used as a back of module temperature sensor)
- Rain gauge Lufft WTB100