BluLink-Vigil
The BluLink-Vigil is a Bluetooth 5 logger for YieldPoint single-point digital deformation…
- Ingress
- IP67
- Supply
- 2x replaceable 3.6V lithium D-cell batteries (not alkaline)
Find what you need to measure with
Instruments, loggers, systems, accessories and software — by name, part number or what you’re measuring.
16 products
Showing 16 of 16
BluPoint App
BluPoint is Yieldpoint's free Android app for reading and managing BluPoint instruments,…
- Platform
- Android
- Modules
- ViewPoint, LogPoint, AccessPoint, CheckPoint, VantagePoint
- Range
- 360 degrees per axis (X, Y, Z triaxial)
- Ingress
- IP65 standard, IP68 optional
d-Cable Instrumented Cable
The d-CABLE is a Yieldpoint instrumented seven-wire cable bolt that uses a miniature…
- Cable
- Seven-wire instrumented cable
- Gauge base length
- 200 mm to 2000 mm
- Range
- Length up to 25 m (80 ft)
- Accuracy
- 0.05 mm
- Range
- 125, 150 (standard), 200 or 250 mm displacement
- Output
- RS485, up to 500 m over 2 x twisted pair; asynchronous serial 9600,8,N,1 ASCII encoded
d-Micro Geotechnical Crackmeter
The d-Micro is a Yieldpoint eddy-current crackmeter that outputs displacement in microns…
- Range
- 10 mm; temperature -40 to 125 °C
- Output
- RS485 (9600,8,N,1) ASCII-encoded: instrument ID, sensor type, temperature and displacement data
d-Plucker Vibrating wire sensor interface
The d-Plucker is a Yieldpoint interface that converts vibrating-wire (VW) transducers,…
- Range
- 166-2000 µs period measurement; temperature -40 to 125 °C
- Output
- RS485 (9600,8,N,1) ASCII-encoded: instrument ID, sensor type, temperature and period data
d-REBAR Instrumented Rock Bolt
The d-REBAR is an instrumented rock bolt that monitors how strain and load develop along…
- Range
- 13-20 mm displacement (F.S.); strain 0-26,000 µε over 500 mm gauge
- Output
- RS485, up to 500 m over 2 x twisted pair
d-Sloughmeter Ground failure and deformation sensor
The d-Sloughmeter is a low-cost ground failure sensor that detects cable slippage or rock…
- Range
- 0-125 mm displacement (variable inductance sensor)
- Output
- RS485, up to 500 m over 2 x twisted pair
d-SPLITSET Instrumented Splitset
The d-SPLITSET is an instrumented version of the SplitSet friction rock bolt that…
- Range
- 0-24.0 short tons (load)
- Output
- RS485, transmits over 1000 ft, readings in tons per node
- Sensor count
- 5-20 temperature sensors
- Enclosure
- Waterproof plastic sleeve
- Range
- ±2° (uniaxial or biaxial)
- Output
- RS485 (9600,8,N,1) ASCII, ~30 chars/reading, transmits over 1000 ft
d-Tilt-SG MEMS Tiltmeter
The d-TILT-SG is a fully waterproof, dual-axis MEMS tiltmeter built around an…
- Range
- ±30° (dual-axis)
- Output
- RS485 (9600,8,N,1) ASCII, up to 100 chars/reading, transmits over 1000 ft
Digital piezometers - d-Piezo
YieldPoint's d-Piezo is a digital piezometer that integrates a MEMS pressure transducer…
- Range
- 0-1000 kPa (unvented)
- Output
- RS485, transmitted to a data logger up to 500 m over 2 x twisted pair
Spectre d-GMM
The Spectre d-GMM is a single-channel Ground Movement Monitor from Yieldpoint that uses a…
- Range
- Stroke (F.S.): 145 mm or 250 mm
- Output
- RS485 serial (9600, 8, N, 1), ASCII-encoded digital signal